It's important that your Jeep's clock is accurate and displays the correct time. If ever your car battery dies and you need to jump-start the engine, you may notice once the car is running that your clock is slightly off. That's because when your battery dies, it stops sending electricity to the system. This causes the radio to freeze temporarily, and as a result, your clock may display the wrong time. Here at Northtown CDJR, we've taken it upon ourselves to help drivers in Amherst, NY, re-set the clock in your Jeep.
Set the Clock
Most new Jeep models in our lineup feature the Uconnect infotainment system. To help set the clock, first, you must locate and press the 'Time' button, which can be found on the outside of the Uconnect unit. After holding down the 'Time' button for a few seconds, you'll notice the time display starts to flash. This is a good sign as it indicates that the clock is ready to be set. Once the digits start flashing, have your phone or a watch handy to confirm the actual time before setting the clock in your Jeep.
Turn the Dial
Using the infotainment knob on the unit, drivers in Niagara Falls, NY, can either turn it clockwise or counterclockwise depending on what time it is. The knob helps increase and decrease the clock's value, which is easy to set once you're in this phase. After finding the correct time, press and release the knob to set the newly established time. You'll notice that the minute's digit will flash, indicating that your clock is properly set and saved. It's really that simple!
Learn More at Northtown CDJR
Proudly serving drivers from Buffalo, North Tonawanda, and Lockport, NY, the experts at Northtown CDJR are committed to helping you diagnose and fix your Jeep when you need it most. If you have any questions about setting the clock or managing the Uconnect infotainment settings in your Jeep, please give us a call right away. For more information, please contact the experts at Northtown CDJR. We look forward to meeting you!